Sorry, you need to enable JavaScript to visit this website.

i-P65+ CGLine+ Polycarbonate enclosure

  • Light source: LED
  • Protection class 1
  • Degree of protection: IP65
  • According to EN1838
i-P65+ CGLine+ Polycarbonate enclosure

The i-P65+ CGLine+ luminaire utilises a high-output COB (Chip On Board) LED with 6.4 watts and is available with two different light distributions: the i-P65+ H CGLine+ version features a reflector with asymmetric light distribution, making the luminaire especially suitable for escape route lighting up to a height of 21 m. The i-P65+ L CGLine+ version generates almost square distribution onto the working plane thanks to a special LED lens, thereby achieving wider light point spacing than luminaires with more circular light distribution. Mounting heights up to approximately 18 m can be implemented.

Data sheet (1 MB) (PDF)
Tender text (41 KB) (MSWORD)
HACCP certificate (205 KB) (PDF)
Lighting data (.ldt) (13 KB) (ZIP)
Download file (201 KB) (JPEG)
Luminous flux i-P65+ L: 900 lm
i-P65+ H: 690 lm
Luminous flux ΦE/Φnom
at end of rated operating time
82 % at 1 h; 57% at 3 h
Housing material Polycarbonate (850°C glow wire resistant)
Housing colour White RAL 90169
Weight 1.75 kg
Type of mounting Ceiling mounting
Terminals Through-wiring from mains (L, L´, N, PE) up to 2.5 mm2
CGLine+ bus through-wiring up to 1.5 mm2
Connecting voltage 220 - 240 V, 50/60 Hz
Power consumption mains operation (max.) (apparent power / effective power) 1h: 21.9 VA / 10.1 W
3h: 21.7 VA / 10.7 W
Permissible ambient temperature + 5 °C to +40 °C 
Battery 1h: Ni-Cd 7.2 V / 1.6 Ah
3h: Ni-Cd 4.8 V / 4 Ah
Light Source COB LED 6.5 W
Degree of protection IP65
Insulation class l



  • LED safety luminaire with high ingress protection class (IP65) for both indoor and outdoor use
  • Robust design (IK08) made from impact-resistant polycarbonate
  • i-P65+ L: with wide-beam symmetrical lense with a near-square light distribution, i-P65+ L variant is suitable for illuminating large areas (Spacing in both direction up to 22 m for E= 1lx) and mounting heights up to 18 m (for 1 h rated operating time)
  • i-P65+ H: With narrow-beam reflector technology, the i-P65+ H variant is especially suitable for escape route lighting with high spacing up to 29 m and mounting heights up to 21 m (for 1 h rated operating time)
  • High lumen output ensures additional suitability for increased illumination levels such as min. 15 lx for high risk task areas or applications with 10.8 lx acc. to NFPA 101
  • With provisions for M20 cable entries on enclosures sides ( 3 x lateral and 1 x at each end side) and BESA entry on rear
  • Minimum maintenance effort and increased safety via use of LEDs with high service life (up to 60,000 h)
  • Suitable for non-maintained and maintained operation
  • With automatic test for reduced inspection effort
  • For autonomous installation or connection to the CGLine+ monitoring system
  • Low operating costs via low connected load
  • Simple fault analysis and status display via 2 colored LEDs
  • Blocking function prevents unintended