Sorry, you need to enable JavaScript to visit this website.

6811 LED CGLine+

  • Viewing distance: 26 meters
  • Single-sided
  • Light source: LED
  • Protection class 2
  • Degree of protection: IP65
  • According to EN1838
  • According to DIN4844
  • Powered by lithium ion
6811 LED CGLine+

The 6811 luminaire series fulfils protection rating IP65, and with an especially tough construction it is ideal for use in outdoor areas and areas with high soiling. LED technology significantly reduces energy consumption. In addition, maintenance effort is reduced to a minimum thanks to the high LED service life of up to 50,000 hours. One, three or eight hours rated operating duration can be freely specified according to application.

Data sheet (1 MB) (PDF)
Tender text (27 KB) (MSWORD)
Download file (316 KB) (JPEG)
Viewing distance 26 m
Luminous flux ΦE/Φnom at end of rated operating time 100 % at 1 h, 70 % at 3 h, 25 % at 8 h
Housing material Polycarbonate (850 °C glow wire resistant)
Housing colour White
Weight 1.6 kg
Type of mounting Wall and ceiling mounting
Terminals Through-wiring from mains (L, L´, N, PE) up to 2.5 mm² 
CGLine+ bus through-wiring up to 1.5 mm²
Connection voltage 220-240 V AC, 50/60 Hz
Power consumption mains operation (apparent power/effective power) 7 VA / 6.6 W
Permissible ambient temperature +5 °C to +35 °C
Battery Lithium-Ion 3.7 V/4000 mAh
with multiple protective circuit
Light source 3 x HighPower LEDs
Degree of protection IP65
Insulation class ll



  • Self-monitoring LED self-contained luminaire for stand-alone operation or for connection to the
    self-contained luminaire monitoring system CGLine+ (see page 5.7)
  • Housing made of polycarbonate with high degree of protection of IP65 for increased tightness
    requirements indoors
  • Selectable operating time 1 h or 3 h
  • Minimum service requirement due to high service life of the LEDs (up to 50,000 hours)
  • Brightness selectable in 3 steps
  • Test results with fault analysis (LED, charging and battery circuit) as well as status displays (operation, function test, duration test) via 3 coloured LEDs
  • Automatic function test (weekly) and duration test (every 3 months)
  • Manual function test or operational duration test via testing buttons
  • Automatic charging monitoring and deep discharge protection with restart inhibit
  • 1 minute delay of normal mode after mains returns (acc. to DIN VDE 0100-718)
  • Blocking function with CGLine+ Web-Controller in times of shut-down