Sorry, you need to enable JavaScript to visit this website.

Brillant 1883, 1884, 1984, LED, Double-sided, 20 m or 28 m

  • Viewing distance: 20 or 28 meters
  • Double-sided
  • Light source: LED
  • Protection class 1
  • Degree of protection: IP20
  • According to EN1838
  • CGLine Technology
Brillant 1883, 1884, 1984, LED, Double-sided, 20 m or 28 m

The exit sign panel luminaire Brillant LED enables discerning escape route designations to be designed individually, attractively and discreetly. Homogeneous illumination and elegant transparency ensure optimal integration into sophisticated light architecture. The use of highly efficient LED technology with technology significantly reduces the connected load and additionally saves thanks to the high LED service life. One or three hours rated operating duration can be freely specified according to application.

No longer available

Viewing distance 1883 = 20 m, 1884, 1984 = 28m
Luminous flux ΦE/Φnom at end of rated operating time 50 % at 1 h, 20 % at 3 h
Housing material Sheet steel, bezel Polycarbonate (850 °C glow wire resistant)
Housing colour white, sim. RAL 9010
Weight 1883 1-3/D LED 3.0 kg, 1884 1-3/D LED 4.0 kg, 1984 1-3/D LED 4.0 kg
Type of mounting 1883, 1884: Recessed ceiling mounting, 1984: Ceiling surface mounting
Terminals Mains connection 3 x 2.5 mm² / Bus connection 2 x 1.5 mm²
Connection voltage 230 V AC, 50 Hz
Power consumption mains operation (apparent power/effective power) 1883: 6.3 VA; 1884, 1984: 7.1 VA
Permissible ambient temperature Maintained mode -5 °C to +30 °C, Non-maintained mode 0 °C to +35 °C 
Battery maintenance free and gas tight NiMh 4.8 V / 1.1 Ah
Light source LED strip
Degree of protection IP20
Insulation class ll

 

Features

  • Self-monitoring LED self-contained luminaire for stand-alone operation or for connection to the central monitoring device CG Controller CGLine 400 or PC-Interface
  • Wall and surface mounting housings with rectangular, slender 50 mm profile housing
  • Recessed mounting version including plastic bezel, optional with metal bezel
  • Selectable operating time 1 h or 3 h
  • Minimum service requirement due to high service life of the LEDs (50,000 hours)
  • Brightness selectable in 3 steps
  • Test results with fault analysis (LED, charging and battery circuit) as well as status displays (operation, function test, duration test) via 3 coloured LEDs
  • Automatic function test (weekly) and duration test (every 3 months)
  • Manual function test or operational duration test via testing buttons
  • Automatic charging monitoring and deep discharge protection with restart inhibit
  • 1 minute delay of normal mode after mains returns (acc. to DIN VDE 0100-718)
  • Blocking function with CG-Controller CGLine 400 or PC-Interface in times of shut-down
  • Luminaires are generally suitable for maintained or non-maintained mode