Sorry, you need to enable JavaScript to visit this website.

71821, LED, Double-sided, 32 m

  • Viewing distance: 32 meters
  • Double-sided
  • Light source: LED
  • Protection class 1
  • Degree of protection: IP40
  • According to DIN4844
  • CGLine Technology
71821, LED, Double-sided, 32 m

The robust aluminium luminaire with its various mounting methods can be used for a wide variety of installation situations. A consistently uniform design even with other viewing distances ensures a harmonious overall appearance for the emergency lighting system. The luminaire can be equipped with a prismatic cover of transparent polycarbonate for also taking on the task of escape route illumination. Especially low connected loads are achieved with use of LED technology. The operating conditions of the LEDs are designed for a service life of 50,000 h, thus significantly minimising maintenance requirements. One or three hours rated operating duration can be freely specified according to application.

Documents
Data sheet (659 KB) (PDF)
Tender text (38 KB) (MSWORD)
Images
Download file (288 KB) (JPEG)
Viewing distance 32 m
Luminous flux ΦE/Φnom at end of rated operating time 50 % at 1 h, 20 % at 3 h
Housing material Aluminium
Housing colour Aluminium anodized
Weight 1.8 kg
Type of mounting Ceiling, pendant, chain or wall bracket mounting
Terminals Mains connection 3 x 2.5 mm² / Bus connection 2 x 1.5 mm²
Connection voltage 230 V AC, 50 Hz
Power consumption mains operation (apparent power/effective power) 11.0 VA
Permissible ambient temperature Maintained mode -5 °C to +30 °C, Non-maintained mode 0 °C to +35 °C 
Battery maintenance free and gas tight, NiMh 4.8 V / 1.1 Ah
Light source 4 x HighPower LEDs
Degree of protection IP40
Insulation class ll

Features

  • Self-monitoring LED self-contained luminaire for stand-alone operation or for connection to the central monitoring device CG Controller CGLine 400 or PC-Interface
  • Enclosure made of slim aluminium profile, anodised, with mitre cut 
  • Selectable operating time 1 h or 3 h
  • Minimum service requirement due to high service life of the LEDs (50,000 hours)
  • Brightness selectable in 3 steps
  • Test results with fault analysis (LED, charging and battery circuit) as well as status displays (operation, function test, duration test) via 3 coloured LEDs
  • Automatic function test (weekly) and duration test (every 3 months)
  • Manual function test or operational duration test via testing buttons
  • Automatic charging monitoring and deep discharge protection with restart inhibit
  • 1 minute delay of normal mode after mains returns (acc. to DIN VDE 0100-718)
  • Blocking function with CG-Controller CGLine 400 or PC-Interface in times of shut-down
  • Luminaires are generally suitable for maintained or non-maintained mode