V-CG-SLI 500
- ENEC certified
- With STAR Technology
- With STAR Plus Technology

LED Supply- and Monitoring module for a LED series connection (1-5 LEDs, 500mA) with integrated monitoring module for single luminaire monitoring (without additional data line) and 20 addresses for function monitoring (CEWA GUARD Technology) and switching modes (maintained/non-maintained and switched emergency luminaires) freely programmable in one circuit without additional data line to the luminaires in conjunction with suitable emergency lighting systems (with STAR-Technology). Error message in case of: Interruption in the LED series connection or a short circuit at the output terminals. Safe fault identification even if one LED fails due to Single individual monitoring (SLI technology = Single LED monitoring Intelligence). Extended ambient temperature area from -40°C to +50°C
Primary side | (data valid for full load with 5 LEDs) |
Rated voltage range | 220 - 240 V, 50/60 Hz / 176 - 275 V DC |
Standby power loss | < 0.5 W (230 V / 50 Hz) |
Current consumption | 43 mA |
Power imput | 11.6 VA / 11.3 W |
Power factor λ | 0.9 |
Inrush current | ≤ 3.0 A |
Operating frequency | 30 - 450 kHz |
Connection terminals | Clamp terminal 2.5 mm² / reserve-polarity protected |
Secondary side | |
Output current | 500 mA +/- 10 % |
Output voltage | 30 V DC (open-circuit operation) +/- 10 % |
Output voltage in operation | 16.5 V +/- 10 % (5 LEDs) |
Lamp load | 1-5 LEDs (rated current 500 mA), series connection UF = 2.85 ... 3.3 V) |
Output power (max.) | 8.5 W |
Connection terminals | 1.5 mm² / not reserve-polarity protected |
Maximum line length | 0.5 m (module – LED) |
Type of mounting | To be mounted in luminaires with protection category I or II |
Degree of protection | IP20 |
Permissible ambient temperature | ta = -40 °C to +50 °C |
Maximal permissible test point temperature | tc = 70 °C |
Dimensions in mm ( H x L x W) | 110 x 30 x 21 |
Housing material / colour | Flame retardant polycarbonate / grey |
Weight | 0.042 kg |
Luminous flux ΦE/Φnom at the end of rated operating time |
100 % |
Features
- Safe fault identification even if one LED fails (SLI-Technology*)
- Suitable for operation at cold ambient conditions down to -40°C, e.g. in cold storage facilitiesLow operating costs due to decreased standby losses < 0.5 W
- Minimized dimensions on the basis of conventional T5 EVG cross section (H x W: 21 x 30 mm) for an eased mounting in narrow luminaires
- Without protective conductor connection. For the use in luminaires with insulation class I or II
- Variable mounting possibilities for different mounting positions (horizontal or sidewise upright)
- Avoidance of installation failures due to a mains connection being protected against polarity reversal
- Shortened inspection effort due to the CEWA GUARD- and STAR+-Technology: Automatic function monitoring of up to 20 luminaires per circuit
- Reduced installation costs due to STAR-Technology: Freely programmable mixed operation of the switching modes per luminaire in one circuit
- Reduced installation expenditures as no additional data line to the luminaires is needed