Sorry, you need to enable JavaScript to visit this website.

N-EVG ... V-CG-S

  • Protection class 2
  • Degree of protection: IP20
  • ENEC certified
  • With STAR Technology
  • With STAR Plus Technology
N-EVG ... V-CG-S

High frequency electronic ballasts for a 4-pin fluorescent lamps with 20 addresses for function monitoring (CEWA GUARD Technology) and switching modes (maintained/non-maintained and switched emergency luminaires) freely programmable in one circuit without additional data line to the luminaires in conjunction with suitable emergency lighting systems (with STAR-Technology).
Adjustable luminous flux relation in DC mode in 10 % steps between 30 % and 100 % for reduction of the needed battery capacity.

Documents
Data sheet (349 KB) (PDF)
Tender text (52 KB) (MSWORD)
Images
Download file (149 KB) (JPEG)
Connection voltage 220 – 240V, 50/60 Hz / 176 – 275 V DC
Standby power loss ≤ 1 W (230V / 50 Hz)
Power input siehe Tabelle n. Seite
Maximum line length 1 m (LCG - lamp)
Type of mounting To be mounted in luminaires with protection category I or II; Attention: Functional earth necessary!
Degree of protection IP20
Permissible ambient temperature ta = -20 °C to +60 °C
Maximal permissible test point temperature tc = 75 °C
Terminals Clamp terminal 1.5 mm² / reserve-polarity protected
Dimensions in mm ( H x L x W) 21 x 360 x 30
Housing material / colour Flame retardant polycarbonate / grey
Weight 35/39/36 W = 0.166 kg, 49 W = 0.174 kg, 54/58/80 W = 0.185 kg
Luminous flux ΦE/ΦN at the end of rated operating time In DC-operation acc. setting 30 - 100 % (10 %-steps)
Energy-Efficiency-Index EEI = A2
Lamp start < 1 s with optimum pre-heating

Features

  • Reduced battery capacity / -costs by adjustable luminous flux of 30 – 100% in DC-operation
  • Minimized dimensions of conventional T5 ECG cross section (H x W: 21 x 30 mm)
  • Avoidance of installation failures due to a mains connection being protected against polarity reversal
  • Shortened inspection effort due to the CEWA GUARD and S+ Technology: Automatic function monitoring of up to 20 luminaires per circuit
  • Reduced installation costs due to STAR-Technology: Freely programmable mixed operation of the switching modes per luminaire in one circuit
  • Reduced installation expenditures as no additional data line to the luminaire is needed
  • With automatic lamp wattage detection and optimal operation of the lamp acc. to IEC-standard
  • Safety by automatic switchoff at lamp failures or at end of lamp life
  • Automatic re-engagement after lamp exchanging