Sorry, you need to enable JavaScript to visit this website.

EVG 18 and 18C V-CG-S

  • Degree of protection: IP20
  • ENEC certified
  • With STAR Technology
  • With STAR Plus Technology
EVG 18 and 18C V-CG-S

High frequency electronic ballasts for a 4-pin fluorescent lamps with 20 addresses for function monitoring (CEWA GUARD Technology) and switching modes (maintained/non-maintained and switched mode) freely programmable in one circuit without additional data line to the luminaires in conjunction with suitable emergency lighting systems (with STAR-Technology).

Connection voltage 220 - 240 V, 50/60 Hz / 176 - 275 V DC
Standby power loss < 0.5 W (230 V / 50 Hz)
Power input EVG 13.3: 13W (see schedule n. page); EVG 18: 18W (see schedule n. page)
Maximum line length 1 m (ECG - lamp)
Type of mounting To be mounted in luminaires with protection category I or II
Degree of protection IP20
Permissible ambient temperature ta = -20 °C to +60 °C
Maximal permissible test point temperature tc = 75 °C
Terminals Clamp terminal 2.5 mm² / reserve-polarity protected
Dimensions in mm ( H x L x W) 27.5 x 140 x 39
Housing material / colour Flame retardant polycarbonate / grey
Weight 0.07 kg
Luminous flux ΦE/ΦN at the end of rated operating time 75%

 

Features

  • Low operating costs due to decreased standby losses < 0.5 W
  • Without protective conductor connection. For the use in luminaires with insulation class I or II
  • Avoidance of installation failures due to a mains connection being protected against polarity reversal
  • Shortened inspection effort due to the CEWA GUARD and S+ Technology: Automatic function monitoring of up to 20 luminaires per circuit
  • Reduced installation costs due to STAR-Technology: Freely programmable mixed operation of the switching modes per luminaire in one circuit
  • Reduced installation expenditures as no additional data line to the luminaires is needed
  • Enlarged ambient temperature range