Sorry, you need to enable JavaScript to visit this website.

i-P65+ CG-S Polycarbonate enclosure

  • Light source: LED
  • Protection class 1
  • Degree of protection: IP65
  • According to EN1838
  • With STAR Technology
  • With STAR Plus Technology
i-P65+ CG-S Polycarbonate enclosure

The i-P65+ CG-S luminaire utilises a high-output COB (Chip On Board) LED with 6.4 watts and is available with two different light distributions: the i-P65+ H CG-S version features a reflector with asymmetric light distribution, making the luminaire especially suitable for escape route lighting up to a height of 26 m. The i-P65+ L CG-S version generates almost square distribution onto the working plane thanks to a special LED lens, thereby achieving wider light point spacing than luminaires with more circular light distribution. Mounting heights up to approximately 18 m can be implemented.

Data sheet (1 MB) (PDF)
Download file (201 KB) (JPEG)
Luminous flux (mains operation) i-P65+ L: 770 lm
i-P65+ H: 590 lm
Luminous flux ΦE/Φnom at end of rated operating time 100%
Housing material Polycarbonate
Housing colour White
Weight 1,75 kg
Type of mounting Ceiling mounting
Terminals 3 x 2 x 2.5 mm²
Connection voltage 220 - 240 V AC, 50/60 Hz, 176 - 275 V DC
Power consumption mains operation (apparent power/effective power) 15.6 VA / 9.3 W
Permissible ambient temperature -20 °C to +30 °C
Current consumption - battery operation (220 V) 40 mA
Light source COB LED 6.4 W
Degree of protection IP65
Insulation class l



  • LED safety luminaire with high ingress protection class (IP65) for both indoor and outdoor use
  • Robust design (IK08) made from aluminium die-cast and impact-resistant polycarbonate
  • With wide-beam symmetrical lens with a near-square light distribution, i-P65+ L variant is suitable for illuminating large areas (Spacing in both direction up to 22 m for E= 1lx and up to 31 m for E = 0.5 lx) and mounting heights up to 18 m
  • With narrow-beam reflector technology, the i-P65+ H variant is especially suitable for escape route lighting with high spacing up to 30 m and mounting heights up to 26 m
  • High lumen output ensures suitability for increased illumination levels such as min 15 lx for high risk task areas or applications with 10.8 lx acc. NFPA 101
  • With provisions for M20 cable entries on enclosure sides ( 3 x lateral and 1 x at each end side) and BESA entry on rear
  • Minimum maintenance effort and increased safety via use of LEDs with high service life (up to 60,000 hours)
  • Shortened inspection effort due to CEWA GUARD technology
  • Automatic function monitoring for up to 20 luminaires per circuit
  • Reduced installation cost through STAR Technology
  • Freely programmable mixed operation, allowing the switching of luminaire modes within one circuit